Good quality!
"Everything was OK. Nice and useful item!"
EDC Threaded Top Cap
Tap It In.
The magic of the EDC Top Cap is how it's installed on your steerer tube. In order to install the Top Cap, you have to thread the steerer tube of your fork. Our EDC Tap Tool makes the job quick and easy. You don’t even need to remove your stem.
The Racer’s Choice.
Enduro world champions and athletes around the globe choose the EDC Top Cap for their race bikes. It’s light, trustworthy and gives you the most storage options of any in-stem EDC carrier.
FAQ
My tool Is stuck inside the top cap, what do I do?
There are a couple possibilities for this:
1. Is the mutli tool oriented correctly within the EDC tool body? If it is backward and not meshing will the tire lever, the tool will bulge and be difficult to remove
2. The multi tool side plate bolts have loosened off and are jamming against the top cap.
For both situations the solution is to: 1. Loosen the stem bolts
2. Using soft jaw pliers, or pliers with a cloth, loosen off the top cap.
3. pull the top cap and tool off the steerer tube.
4. Either remove the multitool, or tighten the side plate bolts. The tool will then slide out of the top cap and you can reassemble everything correctly.
Please email support@oneupcomponents.com if you have any trouble with this process, or damage anything, and we will be happy to help.
Why is my tool hard to remove from the top cap?
It is likely that the top O-ring is dry. Best thing to do is rub a small amount of grease onto the o-ring and re-install it.
If that does not help, please email us at support@oneupcomponents.com.
Will threading my fork steerer void my fork warranty?
Although some companies will state that threading their steerers will void the warranty, we have not been shown evidence of any failures directly a result of a threaded steerer tube.
Can I install a star nut after threading the steerer tube?
It will likely damaged the threads for further use, but you can if necessary, install a star nut in a steerer tube that has been threaded.
Can I buy just the bottom fork plug?
We do not have the fork plugs available as a single item. they are only available within the top cap kit.
Reviews
Overall rating: 4.84375 / 5 from 32 reviews.
AI Generated Review Summary
The EDC Threaded Top Cap is highly praised for its excellent quality, easy installation, and perfect fit. Customers appreciate its versatility, ease of use, and the clean system it creates. The product is also noted for its lightweight design and variety of color options.
Summary topics
- Color Options: 6%
- EDC Quality: 4%
- Tool Versatility: 23%
- System Fit: 5%
- Installation Ease: 7%
Review topics: [quality, looks, cap, tool].
Review highlights
- "Easy installation, perfect fit, high quality product!" —
- "This component fit perfectly and creates a nice clean system." —
- "Perfect fit and color is nice!" —
Reviews
The best
"Looks perfect and is very easy to install"
Awesome
"It looks awesome, it works as it should and it was surprisingly easy to install."
Best idea
"Like it. Looks better than caps and I can store things in it."
like it, but...
"Its realy tricky to tighten the stearer preload without damaging the top cap. I've tried number of cassette tools, non fits well in the grooves. This is the only down side. Other than that, great pece of kit!"
Nice, but…
"Well made but would be better if the cassette groves were deeper for better grip. Mine slipped out when tightened and scratched it a bit. Same thing happened with my local bike shop’s tool. So would be nice with deeper grooves."
Already had one, switched bikes
"Already had one, switched bikes so grabed it. As always, nice finish but fragile"
Cool
"As expected"
Good quality and design, does
"Good quality and design, does the job."
GREAT
"GREAT"
Q&A
- Hi, according to EDC Fork Calculator & Compatibility there is no possibility to use EDC Threaded Top Cap with any lenght of FOX 32 SC? I have Scott Spark RC 900 TEAM (model 2018) with FOX 32 SC Float Performance Elite Air#FIT4 3-Modes and and I would like to go down this path, but the calculator tells me that only supported solutions are Threadless Carrier or EDC Lite. Is it true?
- Hey Petr, our EDC for calculator is accurate. If it's any consultation, the threadless carrier can carry almost all the same tools, as the threaded top cap. Just no chain link pliers!
- Hey, do you do longer threads on the top cap? I have a garmin mount and i would like to have a bit more thread hooking on the fork
- Hi Paul, Thanks for your message, I'm happy to help. We don't make different versions of the top cap. I'd suggest finding a narrower headset spacer to replace a thicker one to allow you to ensure adequate engagement between the top cap and the threads in the fork. Hope this helps, please let me know if there's anything else I can do for you. Cheers,
- Hi. Can the threaded version be used on a straight 1 1/8 inch steerer tube? It seems like it.
- Hi Marcel, In our experience this isn't possible sorry, we cannot guarantee it will work. Please let me know if there's anything else I can help you with. Cheers,
- Hello. I have the edc installed on all of my bikes and I love it. But now, that I have to sell one of my bikes, I want to insert some kind of threaded disk to mount a top cap on. So my question is what size is the thread of the threaded edc? Thanks and best regards, Patrick
- Hi Patrick, Thanks for your message, I'm happy to help. The tap that is used to put the threads in your fork is custom made for us, and doesn't conform to any standard tap sizes. Unfortunately this does means you're not able to find any parts that can fill the space. You'll either need to reinstall a starnut (if taking the threaded top cap) or sell the bike with the threaded top cap on it. Please let me know if there's anything else I can help you with. Cheers,
- Is it possible to get the steerer plug as a spare part? Mine broke as I wanted to get it put my old fork. Best, Patrick
- Hey Patrick, Sorry to hear that, unfortunately we don't have the plugs as a spare part, the only way to receive one is to purchase a new top cap. Please let me know if there's anything else I can help you with. Cheers,
